Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Door trim panel

How to remove the rear door panel (left side) on a Peugeot 3008? Before starting the disassembly work, disconnect the terminals of the battery located in the engine bay. Here’s how to proceed: remove the plastic trim at the side of the window with a lever, then use a screwdriver to unscrew the securing screws on the plastic panel. Once all screws are removed, detach the plastic clips that hold the door. Remove the door panel by hand, disconnect any power connectors and release cables. Perform necessary maintenance on the door by peeling off the adhesive protection.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel on a Peugeot 3008?
How to Remove the Rear Door Panel on a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) As shown in this tutorial, removing the rear door panel on a Peugeot 3008 is a very simple and quick operation. First, remove the internal cover of t…
How to Remove the Front Door Panel of the Peugeot 3008
How to Remove the Front Door Panel of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today's brief instructions will show you how to remove and replace the front door panel of the Peugeot 3008 in simple steps. First, open the front do…
Removing the Door Panel of the Peugeot 3008
Removing the Door Panel of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today's guide will show you how to remove and replace the front door panel of the Peugeot 3008, following the instructions below. First, open the fro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos