Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear bulb of the Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Tail light bulb

To replace the rear headlight bulbs of the Peugeot 3008, we need to open the trunk and remove the protective cover of the headlight. Using a ratchet with a 10mm insert, we unscrew the nuts on the side to release the headlight from its housing. Disconnect the connector to remove it completely. Remove the plate on the headlight to access the bulbs and replace them. Once the bulbs are inserted, mount the plate, connect the connector, and insert the headlight into its housing. Screw on the nut and mount the side protective cover. Close the trunk of the car and turn on the lights to test their operation.

Posted on 6 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear fog light of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today we will see the instructions on how to disassemble and replace the rear fog light and bulb of the Peugeot 3008. First, let's move to the rear p…
How to replace the front headlight bulb of the 2017 Peugeot 3008.
How to replace the front headlight bulb of the 2017 Peugeot 3008.
Peugeot 3008 (2016-2023 / MK 2, P84) The steps to follow to replace the front headlight bulb of the Peugeot 3008 are: - open the front hood; - remove the cap from the headlight dome; - d…
How to replace the headlight bulb of the Peugeot 3008
How to replace the headlight bulb of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the front headlight bulb of your first series Peugeot 3008 is really very simple and thanks to the procedure described in the following gui…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos