Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter in a Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Diesel fuel filter

See other generations:
Video tutorial

In the selected tutorial, you can see the steps to follow to replace the diesel filter of a Peugeot 3008 car. First, locate the filter, which is in the engine compartment, near the vehicle's battery, so open the hood to locate it. Remove the plastic cover by unscrewing the nuts at the base and disconnect the electrical connector; then remove the diesel pipes and, if necessary, use a pump to remove the remaining diesel.

Unscrew the filter from its housing and install the new filter in the same position as the previous one. Reconnect the fuel pipes and the electrical connector, and reposition the plastic cover, finally securing it with the appropriate nuts.


Posted on 2 September 2025 by ScegliAuto


Related tutorials

How to Change the Diesel Filter on a Peugeot 3008 Diesel MK1
How to Change the Diesel Filter on a Peugeot 3008 Diesel MK1
Peugeot 3008 (2009-2016 / MK 1, T84) In this video, see how to change the diesel filter on a Peugeot 3008 MK1: open the bonnet and remove the engine cover to access the diesel filter. Di…
How to Remove the Diesel Filter from a Peugeot 3008?
How to Remove the Diesel Filter from a Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) Before you can start, open the bonnet of your Peugeot 3008. Begin by disconnecting and moving the hoses connected to the diesel filter, unclipping th…
How to change the air filter of the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) In order to change the air filter of your Peugeot 3008 by yourself, you must carefully read the following guide and follow the various steps in the c…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the diesel filter located on my Peugeot 3008? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos