Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Peugeot Traveller

Model: Peugeot Traveller MK 1 - Years 2016-2024
Part: Service warning light

Today we will explain how to independently reset the service light related to the car service and engine oil change on a Peugeot Traveller vehicle, produced from 2016 to 2024. To reset the service light, we need to turn on the instrument panel and immediately press the back button which also shows the symbol of a wrench, located below the instrument panel display. After resetting the service light, we restart the instrument panel. If the reset is unsuccessful, it will be necessary to check the oil tank sensor or the oil tank connector.

Posted on 5 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the AdBlue warning light in the Peugeot Traveller van?
How to remove the AdBlue warning light in the Peugeot Traveller van?
Peugeot Traveller (2016-2024 / MK 1) If the AdBlue warning light has come on in the instrument panel of our Peugeot Traveller van, it means that the fluid in the anti-pollution system ha…
How to Reset the Service Light on the 2017 Peugeot Traveller
How to Reset the Service Light on the 2017 Peugeot Traveller
Peugeot Traveller (2016-2024 / MK 1) The service light on the 2017 Peugeot Traveller illuminates when a service is due and needs to be reset. Follow these steps to reset the light: First…
How to Replace the Air Filter on the Peugeot Traveller
How to Replace the Air Filter on the Peugeot Traveller
Peugeot Traveller (2016-2024 / MK 1) To replace the engine air filter in your Peugeot Traveller (2016-2023), it only takes a few minutes. In fact, by following the steps outlined in this…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos