Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Power Battery from a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Battery

How to remove the power battery from a Peugeot 3008? Follow these steps for removal: open the car door and pull the lever to open the engine bay located at the bottom left of the dashboard, then lift the front bonnet, releasing the locking lever with your fingers, and secure it. Once the engine bay is open, you will find the battery at the top; remove the fastening bolts from the battery terminals, then take the battery out of the engine bay and replace it with a new one (same voltage). Close the bonnet after maintenance and test the new battery.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of a Peugeot 3008
How to Replace the Battery of a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Remove the battery from the Peugeot 3008. Here’s how to remove the damaged battery from inside the compartment. Open and lift the bonnet. You will fi…
How to Replace the Battery in a Peugeot 3008?
How to Replace the Battery in a Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the battery in a Peugeot 3008, open the bonnet to access the engine bay and locate the battery, which is situated directly under the winds…
How to Replace the Battery in a Peugeot 3008?
How to Replace the Battery in a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) The battery in the Peugeot 3008 is located in the engine bay, on the driver's side and just below the windscreen. To replace it, first unlock the eng…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos