Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Poly-V Belt on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: V-belt

Let’s see how to replace the auxiliary belt on a Peugeot 208. First, slightly pull the tensioner pulley to loosen the belt and remove it, then return the tensioner pulley to its initial position. Check that the pulleys are still in good condition before fitting the new belt. Ensure that the belt adheres properly to all the gears; if not, adjust it along the gears. To fit it perfectly, you may need help from the tensioner. Return the tensioner pulley to its initial position so you can start the engine.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Timing Belt on the Peugeot 208?
When to Replace the Timing Belt on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) The timing belt synchronises the operation of the crankshaft with the camshaft (which controls the movement of valves and pistons) and, in some cases…
How to Replace the Timing Belt on a Peugeot 208
How to Replace the Timing Belt on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) To replace the timing belt on a Peugeot 208: lift the car on a column lift (jack), remove the front wheel, use a screwdriver to detach the right whee…
Timing Belt Replacement on Peugeot 208
Timing Belt Replacement on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Remove the timing belt on the Peugeot 208 if you have exceeded the maximum mileage for safety. Here’s how to remove the belt. Lift the front bonnet; …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos