Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Belt on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Timing belt

Learn how to remove the belt and tensioner pulley on a Peugeot 206. Open and lift the front bonnet; use a socket spanner to remove the metal cover that protects the belts, then use a fixed spanner to loosen the tensioner pulley and slide the belt off. With a socket spanner, unscrew the tensioner pulley mounting bolt and remove it from the engine bay. Fit the new tensioner and belt, tightening everything with the fixed spanner. Finally, refit the cover bolts and test the vehicle's proper operation.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Timing Belt Replacement on Peugeot 206
Timing Belt Replacement on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the timing belt on the Peugeot 206 if it needs changing. Changing the timing belt is very important to avoid damaging the engine. Here’s how t…
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) Next, we will discover the steps that will allow you to disassemble and replace the timing belt on the Peugeot 206 1.4 HDi. First, lift the vehicle a…
Removing the Belt with the Tensioner on a Peugeot 206
Removing the Belt with the Tensioner on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This video shows how to remove the belt with the tensioner on a Peugeot 206. Lift the bonnet and secure it with the prop, remove the water pump locat…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos