Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Service warning light

Here’s a video guide dedicated to cancelling the Service light on the Peugeot 2008. Firstly, note that no electronic diagnostic tools are needed for this operation. Additionally, it should be remembered that the reset is performed after completing the scheduled maintenance listed in the vehicle's user manual. Proceed with the operation to turn off the light in question: press and hold the button located at the end of the left lever of the steering wheel while simultaneously turning on the ignition. Wait a few seconds for the light to blink, then turn off completely.

Posted on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How do you turn off the service light on a Peugeot 2008? Follow these steps to switch off the car's light. Turn on the instrument panel and check the…
How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) You can completely clear the service light from the instrument panel of the Peugeot 2008 by pressing and holding the button located in the centre of …
What is the Command Sequence to Reset the Service Light on the Peugeot 2008?
What is the Command Sequence to Reset the Service Light on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Using the video guide posted here, you will be able to clear the DIY service light without any diagnostic equipment connected to the vehicle, no assi…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos