Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

Need advice on how to change the pollen filter? You're in the right place. You won't need any tools, just the two new filters.

Ensure the car is parked properly and that the engine is not too hot. Open the bonnet and on the left, after the windscreen washer reservoir, you will find a cover. Release it by pressing the three clips, and you will access the box with the old filters.

Press on the sides and lower the plastic tab to remove them; now replace them with the new ones, remembering how they were positioned originally. Press the tab back into place.

Now, reattach the plastic cover with the three clips.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Peugeot 208
How to replace the cabin air filter of the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) Replacing the cabin air filter in your second-generation Peugeot 208 is very simple. To complete the operation, you must read the following guide and…
How to Replace the Cabin Filter on a Peugeot 208?
How to Replace the Cabin Filter on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the cabin filter on a Peugeot 208, open the bonnet to access the grille located at the top of the engine bay, just below the windscreen. B…
How to Replace the Pollen Filter on a Peugeot 208
How to Replace the Pollen Filter on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How to replace the pollen filter on a Peugeot 208? The filter is not located inside the cabin but in the engine bay, follow these steps for disassemb…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos