Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fan on a Peugeot 207 1.6 HDi

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Video tutorial

Today's instructions will illustrate the procedure for removing and replacing the cooling radiator fan on a Peugeot 207 1.6 HDi. First, open the bonnet of the vehicle and start unscrewing all the upper fastening screws; then unscrew the screws of the lower engine cover, followed by the screws of the fan located at the bottom.

At this point, disconnect the power electrical connector, remove and replace the fan with a new one; secure it properly to the radiator, start the engine, and check the fan activation after a certain temperature.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

Replacing the cooling radiator on the Peugeot 207 1.4 16V
Replacing the cooling radiator on the Peugeot 207 1.4 16V
Peugeot 207 (2006-2015 / MK 1) In this guide, we will see the main instructions on how to remove and replace the cooling radiator of the engine on the Peugeot 207 1.4 16V. First, o…
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
Peugeot 207 (2006-2015 / MK 1) Before you can start, start the engine of your Peugeot 207 1.6 hDi, then open the bonnet. Begin by disconnecting one end of the hose connected to the…
How to replace the radiator of the Peugeot 207
How to replace the radiator of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today we will explain how to replace the radiator of the Peugeot 207 on your own. The radiator of the Peugeot 207 is located on the front of the car,…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the Peugeot 207 oil pressure sensor located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos