Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Command Sequence to Reset the Service Light on the Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Service warning light

Using the video guide posted here, you will be able to clear the DIY service light without any diagnostic equipment connected to the vehicle, no assistance from specialised personnel, you will achieve this on your own. Proceed as follows: keep the button at the end of the left lever of the steering wheel pressed, turn on the instrument panel, wait for the appearance of the spanner icon on the onboard computer, and continue to hold the button until the light goes out. Once done, release the button and turn off the ignition.

Posted on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Peugeot 2008
How to Reset the Tyre Pressure Warning Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) If you have noticed that the low tyre pressure warning light is illuminated on the dashboard, you need to check the tyre inflation pressures and, if …
How to reset the service indicator on a Peugeot 2008 DIY.
How to reset the service indicator on a Peugeot 2008 DIY.
Peugeot 2008 (2019-2026 / MK 2) On your Peugeot 2008, the oil/service duration reset is performed from the instrument panel using the trip odometer reset button (Trip/0). With the v…
How to reset the "Service" light on a Peugeot 2008?
How to reset the "Service" light on a Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Good morning, today the goal is to reset the "Service" light on our Peugeot 2008. Before performing this procedure, it will be necessary to have prop…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos