Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A Different Way to Lock the Doors While Driving in the Peugeot 208

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

Let's see how to activate the automatic door locking feature while driving in the Peugeot 208. By holding down the central locking button on the dashboard, you enter configuration mode, through which you can enable or disable the function that automatically locks the doors when a certain speed is exceeded.

This is a very useful feature to prevent accidental door openings from the inside while the car is in motion, and it is an additional safety measure to deter unauthorized access attempts when the car is stopped at traffic lights.

Once the function is activated, the doors automatically lock as soon as the speed exceeds 10/15 miles per hour and remain locked until opened from the inside.


Posted on 3 June 2026 by ScegliAuto


Related tutorials

How to Install Wind Deflectors on the Peugeot 208?
How to Install Wind Deflectors on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To install the wind deflectors on the Peugeot 208, use a screwdriver to pry up the seal around the door glass. At the top right corner and the bottom…
How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) After servicing your Peugeot 208 Mk2, you need to manually reset the service light to eliminate it permanently. The entire procedure is quite simple …
How to replace the air filter of the Peugeot 208
How to replace the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) The engine air filter in your first edition Peugeot 208 plays a very important role, that is to allow the engine to breathe and therefore to perform …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos