Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to remove the rear view mirror of a Peugeot 208

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Outside rearview mirror
Operation: How to remove the rear view mirror of a Peugeot 208

How to remove the rear view mirror of a Peugeot 208? Let's see how to proceed in this video. With a lever with plastic coating, we go to pry between the perimeter of the mirror frame and the mirror glass of the same. We pry until the rear-view mirror detaches from the mirror (very delicate operation because the glass or the mirror itself could break). Once the damaged mirror glass has been removed, disconnect the glass power supply terminal, press the locking clips to disconnect the mirror cover. Finally we can replace the damaged part with the new one. We disassemble the cap to replace it.


Posted on 18 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 208 2019-2026 - Why don't the mirrors of the Peugeot 208 open? Read Answer
    • 208 2012-2019 - How do you replace the wing mirror on a Peugeot 208? Read Answer
    • 208 2019-2026 - How is the electric mirror of the Peugeot 208 activated? Read Answer
    • 208 2012-2019 - Why are the exterior mirrors of the Peugeot 208 blocked? Read Answer
    • 208 2019-2026 - How much does it cost to replace the exterior mirror on the Peugeot 208? Read Answer
    • 208 2019-2026 - Why is the Peugeot 208 outside rearview mirror not working? Read Answer
    • 208 2019-2026 - Why do the Peugeot 208's rearview mirrors not open? Read Answer
    • 208 2012-2019 - How to replace the exterior mirror on the Peugeot 208? Read Answer
    • 208 2019-2026 - Why do the Peugeot 208's rearview mirrors not open? Read Answer
    • 208 2019-2026 - How much does it cost to replace the rear view mirror of the Peugeot 208? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos