Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Internal Fan on the Peugeot 407 That Is Not Working

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Blower motor

Video tutorial

If the air conditioning fan on the Peugeot 407 is not working, the issue may be a poor connection, not necessarily the motor or the resistor. Before replacing expensive components, check the wiring: often the fault lies in the fan motor connector, hidden behind the climate module, where the contacts overheat and burn out. Check the continuity with a multimeter and inspect the connector: if the pins are blackened or deformed, the problem is there.

The air conditioning resistor may be functioning, but the signal does not reach the motor due to the damaged connector. In some cases, the fault may be intermittent, making diagnosis more complex.

Repairing or replacing the connector resolves the issue.


Posted on 28 July 2026 by ScegliAuto


Related tutorials

How to replace the cabin fan of the Peugeot 407
How to replace the cabin fan of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) These short and simple instructions will show us how to disassemble and replace the cabin fan of the Peugeot 407. First, we open the front door on th…
Where is the Cabin Fan Fuse Located in a Peugeot 407?
Where is the Cabin Fan Fuse Located in a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) If the cabin fan in your Peugeot 407 has suddenly stopped working, first check the status of the respective fuse, the location of which is indicated …
How do you remove the fan from the heating system in the Peugeot 407?
How do you remove the fan from the heating system in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) When turning on the hot air in your car, in this case a Peugeot 407, and nothing happens, we are facing one of the following problems: blown fuse, sh…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos