Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

You can completely clear the Service light on the Peugeot 208 by entering the cabin and pressing the SET button located below the display. While holding it down, insert the key into the ignition and turn it until the instrument cluster lights up: at this point, you will notice the display will light up and a ten-second countdown will begin.

At the end of the countdown, you can release the SET button and switch off the instrument cluster. Once done, turn the instrument cluster back on to check that the Service light is off.


Posted on 5 September 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Good morning, today’s objective is to reset the "Service" light on your Peugeot 208. Before doing this, ensure that you have completed the service. S…
How to Reset the Service Light on a Peugeot 208?
How to Reset the Service Light on a Peugeot 208?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To reset the service light on a Peugeot 208, turn on the instrument panel and navigate to the menu that appears on the central touchscreen display. S…
How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos