Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" indicator on a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

Good morning, today's goal is to reset the "Service" light of our Peugeot 208. Before being able to do this, we must make sure that we have carried out the service. Let's start by turning on the vehicle's instrument panel by turning the key in the ignition switch. Then, we will have to press and hold the reset button located below the instrument panel. We must hold it down until the "Service" light goes off. Once the light disappears, we can release the button, and we will have successfully completed the reset on our Peugeot 208.

Posted on 19 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the "Service" light on a Peugeot 208, follow these steps. First, make sure the key is in the "Off" position. Then, press and hold the button…
How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, start by turning on the instrument panel. Then, access the onboard computer using the buttons on the s…
How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, proceed by pressing and holding the button on the turn signal lever. While holding down this button, t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos