Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Shift knob

Video tutorial

To replace the gear knob on a Peugeot 207, start by removing the small lower plastic trim, which is secured with two side clips: gently pull it away. Underneath, there is an original cable tie that secures the leather gaiter.

Using a knife or pliers, break the cable tie and remove it; this will allow the gaiter to slide down, exposing the knob. To extract the old knob, rotate it sideways and pull it upwards with force: it has no threading, it is just a press fit. To fit the new knob, insert it onto the stalk and push it down, tapping with the palm of your hand until it clicks into place.

Then, reposition the gaiter and secure it with a new cable tie (or alternatively with a sturdy elastic band) passing it through the designated groove. Finally, reposition the lower trim by clicking the two clips back in place.

The operation is simple and does not require special tools.


Posted on 10 September 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Peugeot 207
How to Replace the Gear Knob on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you begin, sit in the driver's seat of your Peugeot 207. Start by unhooking and lifting the lower section of the gear lever gaiter. Then, gras…
Replacing the gear knob on a Peugeot 207
Replacing the gear knob on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the gear knob on a Peugeot 207, following the instructions below. First, get into th…
How to Replace the Gear Knob on a Peugeot 207?
How to Replace the Gear Knob on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the gear knob on a Peugeot 207, simply grasp the piece and pull it upwards to remove it from the end of the lever. Once the knob is remove…

    Frequently Asked Questions

    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos