Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oil Filter on Peugeot 206 1.4 HDi

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Oil filter

Video tutorial

The oil filter is often changed along with the engine oil; let's see how to proceed with the replacement. Pull up the bonnet release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Use a socket to unscrew the tightening bolt of the cap where the oil filter is located.

Remove the worn oil filter and position a new one. Lift the car on a jack and unscrew the bolt of the oil sump; allow the liquid to drain into a container. Finally, top up with new oil. Check the operation of the engine.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
Peugeot 206 (1998-2012 / MK 1) Today's instructions will show you how to remove and replace the diesel filter on a Peugeot 206 2.0 HDI in simple steps. First, open the bonnet of th…
Oil Filter Replacement on a Peugeot 206
Oil Filter Replacement on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the oil filter on a Peugeot 206? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench to uns…
How to Remove the Starter Motor from the Peugeot 206 1.9 HDI
How to Remove the Starter Motor from the Peugeot 206 1.9 HDI
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial, you will see how to remove and replace the starter motor on the Peugeot 206 1.9 HDI. First, open the bonnet and begin by r…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos