Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Temperature Sensor from a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Engine coolant temperature sensor

Let’s see how to remove the temperature sensor on a Peugeot 207. Lift the front bonnet of the engine; if you cannot access from the front, go underneath the car (lift it with a column lift). Disconnect the power connector of the temperature sensor (use a screwdriver if needed), remove it and fit a new one. Refit the engine cover panel underneath the car with all the attached bolts (if you accessed from underneath the car). Test the correct operation of the temperature sensor by starting the car.

Updated on 15 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Peugeot 207 (2006-2015 / MK 1) Today's instructions will allow you to dismantle and replace the coolant temperature sensor of the engine on a Peugeot 207 1.4 VTi. First, open the b…
Peugeot 207 (2006-2015 / MK 1) Learn how to remove and replace the air temperature sensor on a Peugeot 207: open the bonnet, lift it and secure it with the prop rod. Disconnect the…
Peugeot 207 (2006-2015 / MK 1) The instructions in this guide will show us how to disassemble and replace the engine coolant temperature sensor of the Peugeot 207 1.6 HDI. First, w…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos