Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant temperature sensor of the Peugeot 207 1.6 HDI

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine coolant temperature sensor

Video tutorial

The instructions in this guide will show us how to disassemble and replace the engine coolant temperature sensor of the Peugeot 207 1.6 HDI. First, we open the car's engine hood and start disassembling and removing the air filter box, unscrewing the fixing screws and disconnecting the intake hose; we also remove the battery and battery holder, disconnecting both terminals, as shown in the video.

At this point, we remove the temperature sensor clip, disconnecting the electrical connector to remove it and replace it with the new one!


Posted on 3 February 2025 by ScegliAuto


Related tutorials

How to Replace the Coolant Temperature Sensor on a Peugeot 207 1.4 VTi
How to Replace the Coolant Temperature Sensor on a Peugeot 207 1.4 VTi
Peugeot 207 (2006-2015 / MK 1) Today's instructions will allow you to dismantle and replace the coolant temperature sensor of the engine on a Peugeot 207 1.4 VTi. First, open the b…
Replacing the Radiator Fan on a Peugeot 207 1.6 HDi
Replacing the Radiator Fan on a Peugeot 207 1.6 HDi
Peugeot 207 (2006-2015 / MK 1) Today's instructions will illustrate the procedure for removing and replacing the cooling radiator fan on a Peugeot 207 1.6 HDi. First, open the bonn…
How to Replace the Coolant in a Peugeot 207
How to Replace the Coolant in a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To replace the coolant in a Peugeot 207, open the bonnet and disconnect the car battery. Open the cap of the coolant reservoir and lift the 207 with …

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos