Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gearbox Cover on a Peugeot 5008

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

Is the central tunnel cover on your Peugeot 5008 damaged? Do you want to replace it? Here’s how to proceed. Unclip the gaiter frame from the plastic cover on the central tunnel.

Use a plastic lever and pry between the two plastics (as shown in the video). Separate the two plastics from the central tunnel (gear lever frame and tunnel cover).

If you want to remove the lower plastic, you need to unscrew the gear knob from the shaft. Fit the new plastics over the central tunnel, first the cover plastic and then the frame.

Refit the gear knob to finish.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on the Peugeot 5008
Replacing the Gear Knob on the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Today's guide will show you the instructions to remove and replace the gear knob on the Peugeot 5008. First, get inside the vehicle and pull the gear…
How to Replace the Transmission Oil of the Peugeot 5008
How to Replace the Transmission Oil of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) The main instructions in this guide show the procedure for replacing the gearbox oil of the Peugeot 5008. First, raise the vehicle and start by unscr…
How to replace the manual transmission oil of a Peugeot 5008
How to replace the manual transmission oil of a Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) In this video, we will see how to change the manual transmission fluid of a Peugeot 5008; the same procedure is also valid for the Peugeot 3008. Of c…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos