Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the manual transmission oil of a Peugeot 5008

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Transmission fluid

In this video, we will see how to change the manual transmission fluid of a Peugeot 5008; the same procedure is also valid for the Peugeot 3008. Of course, we need to go under the car and locate the plug for draining the oil. We also need to have a basin to collect the used oil, which we will then dispose of at an authorized center. Of course, we will also need to remove the protection located under the car, in order to drain the fluid properly. We will need to replace the plug and gasket and then put the oil back in its place by topping it up from above. Check the owner's manual, but it takes about two liters of oil. From above, we need to remove the air duct tube to reach the transmission and breather. Using a funnel with an extension, we will fill the transmission with 75W80 oil. It is essential that it is high-quality oil; start the engine for a bit and check for any leaks from the plug below.

Posted on 3 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 5008 (2009-2016 / MK 1) The main instructions in this guide will show us the process of replacing the gearbox oil of the Peugeot 5008. First of all, we lift the vehicle and …
Peugeot 5008 (2009-2016 / MK 1) Before you can begin, open the driver's side door of your Peugeot 5008. The cabin fuse box is located on the lower left side of the steering column. …
Peugeot 5008 (2017-2024 / MK 2) If the engine oil light of your Peugeot 5008 continues to stay on even after recently changing the oil and filter, then you must proceed with manuall…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos