Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Door Panel on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Door trim panel

To remove the inner door panel on the Peugeot 308, start by removing the plastic handle of the door. Use a small pry bar for this operation. Next, remove the electric window switch block after disconnecting its electrical connector. At this point, unscrew the five screws that secure the panel in place using the appropriate screwdriver. Two of these screws are located at the handle's mounting point. One is at the lever for opening the door (you need to remove the small plastic cover that hides it), and the last two are at the top of the panel, near the upper edge, close to the door's stop (as shown in the video images). Carefully remove the opening lever's trim and the small courtesy light at the bottom of the panel, after disconnecting it from the electrical wires. Now, pry along the entire perimeter of the panel with a plastic pry bar to release it from the clips holding it in place. Lift the panel from the bottom and push it upwards to remove it. For reassembly, after replacing any damaged parts (such as clips), follow the reverse of the disassembly steps.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Peugeot 308 (2013-2021 / T9, MK 2) Today’s steps will illustrate the procedure for removing and replacing the front door panel of the Peugeot 308. First, open the front door and start …
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos