Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

Is the door panel on your Peugeot 206 damaged? Here’s how to remove it. Disconnect the battery terminals located in the engine bay. Remove the window winder handle. Using a screwdriver, unscrew the screws located in the space of the upper door opening lever and the screws present in the handle. Remove the trim around the opening lever, unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull the panel off by hand and detach it from the door (disconnect the wiring harness and the opening cable). Refit the new panel with all the screws and components.

Updated on 18 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you begin, open the front door of your Peugeot 206. Start by uncliping and removing the internal cover located near the rearview mirror, then …
Removing Front Door Panel on Peugeot 206
Removing Front Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel if it is not repairable on a Peugeot 206. Remove the driver's left panel. Take off the frame of the door opening lever and det…
How to Remove the Door Panel of a Peugeot 206
How to Remove the Door Panel of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you start, open the door of your Peugeot 206. Begin by prising off and removing the internal handle trim. Next, unscrew and remove all the scr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos