Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Antenna Replacement for Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Antenna

Removing the antenna on a Peugeot 206? Let's see how to remove the antenna support. Use a screwdriver to pry between the light and the headlining, pull the light out from the panel and disconnect the power connector. Remove the screw cover, unscrew the mounting bolt of the antenna support (located between the metal and the support). After removing the old support, fit the new one (screw the bolt with the screwdriver until it is fully secured). Test the antenna's proper functioning. Refit the screw cover and the light in their housing.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna with Base on a Peugeot 206
How to Replace the Antenna with Base on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to replace the radio reception antenna on a Peugeot 206? Let's see how to remove the antenna from the roof. Lever between the interior light and …
Oil Filter Replacement on a Peugeot 206
Oil Filter Replacement on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the oil filter on a Peugeot 206? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench to uns…
Timing Belt Replacement on Peugeot 206
Timing Belt Replacement on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the timing belt on the Peugeot 206 if it needs changing. Changing the timing belt is very important to avoid damaging the engine. Here’s how t…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos