Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Spark Plugs

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Spark plugs

Remove the screws by acting on the bolts located on the spark plug cover. Disconnect the coil pack; the first spark plug is at the bottom of the well. Using the appropriate spark plug socket, which has a rubber gripping device, gently insert it onto the spark plug and unscrew it. Be careful not to drop any foreign objects into the well. Replace the spark plug with one of the same model, carefully inserting it into the well, always using the appropriate socket and gently turning it while ensuring it screws in correctly. If you encounter resistance, remove it and try again. The spark plugs should be tightened with a torque wrench; if you do not have one, screw them in without overtightening. Repeat the same operation with the other spark plugs.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Spark Plugs on a Peugeot 307
How to Change the Spark Plugs on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the spark plugs on a Peugeot 307, pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove th…
Spark Plug Replacement on 307 cc
Spark Plug Replacement on 307 cc
Peugeot 307 (2001-2009 / MK 1) Removing the spark plugs on a Peugeot 307, here’s how to do it from inside the engine. Pull the lever to open the engine bay and lift the front bonne…
How to Remove the Spark Plugs on a Peugeot 307
How to Remove the Spark Plugs on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Here’s how to remove the spark plugs on a Peugeot 307: pull the lever to open the engine compartment and lift the front bonnet, securing it in place.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos