Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headrest on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Seat

How do you remove the headrest from the front seat? Remove the old headrest and replace it. Open the door and enter the back of the car (rear passenger seat), then press the plastic clips located under the trim of the front headrest (round plastic), and lift the headrest upwards to remove it from the front backrest. Insert the seat cover and fit the front headrest (just push the headrest down). Replace the headrests on other seats if they are irreparably damaged.

Updated on 28 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to remove the headrest of the front seat of a Peugeot 206
How to remove the headrest of the front seat of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Removing the front headrest of the Peugeot 206 seat is a very simple and quick operation to be carried out independently. To perform this activity, w…
Replacement of the steering tie rods on the Peugeot 206
Replacement of the steering tie rods on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide, you will find instructions on how to dismantle and replace the steering tie rods on the Peugeot 206 in simple steps. First, lift the v…
How do you remove the rear seats of the Peugeot 206?
How do you remove the rear seats of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to remove the rear seats of the Peugeot 206, you need to loosen the screws that fix the bench to its housing: the screws will be located in …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos