Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

In today's video tutorial, you will learn how to remove and replace the bulbs in the front headlight of a Peugeot 206 in simple steps. First, open the bonnet by pulling the lever inside the car. Then, remove the plastic protective cap for the bulbs and disconnect the electrical connector for the headlight. To remove the bulb, unclip and open the metal spring, then extract the bulb. Replace it with a new one that has the correct fitting, and reattach the spring and electrical connector. Finally, replace the plastic cap.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the H4 Bulb on a Peugeot 206
Changing the H4 Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, you will see how to change the front headlamp bulb on a Peugeot 206. First, open the bonnet: removing the bulb is relatively simple as…
How to Activate the Fog Lights of a Peugeot 206
How to Activate the Fog Lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…
How do you reset the Service light on the Peugeot 206?
How do you reset the Service light on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The procedure for resetting the Service light that appears on the Peugeot 206 involves holding down the button located on the right side of the instr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos