Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to remove the injectors of a Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Injectors
Operation: How to remove the injectors of a Peugeot 206

Before starting, we will have to open the front hood of the battery, thus obtaining the necessary space to work. So let's start by removing the entire air filter block, unscrewing the relative screws and disconnecting the sleeves. By doing so we will have reached the injectors. We then proceed with disconnecting the petrol tube. Once we have disconnected the tube, we will have to unscrew and remove the relative bolts that secure the injectors. When we have removed all the bolts, we can go to extract the injectors, and we will have successfully completed the replacement.


Posted on 30 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - How to solve the problem with the injectors on the Peugeot 206 1.4 HDI? Read Answer
    • 206 1998-2012 - Where are the injectors of the Peugeot 206 1.4 hdi? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos