Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Replacement car radio on Peugeto 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Car stereo
Operation: Replacement car radio on Peugeto 207

Working with the car off and the key removed, insert the special double needles in the four holes in the corners of the car radio, pushing them to the end of their travel. Once this is done, the needles will have "hooked" the car radio and you can pull them (at the same time) by extracting the same. Disconnect the antenna cable and dual connector by pushing on the small tab and lifting the plastic bar that holds it in place. Now that you have removed the old car stereo, run the cables through the frame of the new one and mount it in reverse. If the antenna attachment does not match, you will need to purchase the appropriate adapter.


Posted on 1 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos