Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Stalk Switch from Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012

Today we will see the main steps to remove and replace the stalk switch on a Peugeot 206. Get inside the car and first remove the airbag by disconnecting the electrical connector found at the back. At this point, remove the plastic cover that conceals the steering column to free the stalk switch assembly; now unscrew the securing screws and remove it as shown in the video. Once done, using a 10 mm spanner, remove the clip and disconnect the electrical connectors: follow the video to the end to open the stalk switch and for reassembly!

Updated on 2 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Indicator Stalk on a Peugeot 206
How to Replace the Indicator Stalk on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide outlines the main steps to remove and replace the indicator stalk on a Peugeot 206. First, get into the cabin and unscrew the screws of th…
How to Remove the Stalk Switch on a Peugeot 206
How to Remove the Stalk Switch on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the stalk switch from a Peugeot 206? Let's see how to proceed with the disassembly. Before removing the car's steering wheel, disconnec…
How to Remove the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you begin, open the front door of your Peugeot 206. Start by uncliping and removing the internal cover located near the rearview mirror, then …

    Frequently Asked Questions

    • 206 1998-2012 - How many km should the Peugeot 206 be serviced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos