Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How to replace the turn signal in the exterior mirror of the Peugeot 508

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Side indicator light
Operation: How to replace the turn signal in the exterior mirror of the Peugeot 508

In this video we will describe the various steps to replace the indicator integrated in the external rearview mirror of the Peugeot 508.We begin by unhooking the rearview mirror using a plastic lever, disconnect the cables of the defrosting system from the mirror, unhook the cap with the help of tweezers and remove it . Then we disconnect the arrow, with the help of a slotted screwdriver we raise the flap of the connector and at the same time push it towards the outside of the mirror. We use a screwdriver to release the arrow and extract it upwards. We insert the new arrow and connect the connector, reassemble the cap, conclude by connecting the cables previously disconnected from the mirror and hook it by pressing evenly.


Posted on 17 January 2024 by ScegliAuto



Guide to disassemble the exterior rearview mirror on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this video tutorial we will see the main steps that will allow us to disassemble and replace the external rearview mirror on the Peugeot 508 first
How do you replace the mirror cap of the rearview mirror of the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In order to replace the mirror cap of the Peugeot 508, you need to lever with an object so that the mirror glass can be removed from its housing: onc
Disassembly of the external rearview mirror of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Briefly, we will see the instructions that will allow us to dismantle and replace the external rearview mirror of the Peugeot 508, following these si

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos