Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Remove the External Wing Mirror on the Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

In this video tutorial, we will see the main steps to remove and replace the external wing mirror on the first series Peugeot 508. First, open the front door and start by removing the door panel; then unscrew the fixing screws of the speaker, disconnecting the electrical connector of the mirror, as shown in the video.

At this point, you can unscrew the screws of the wing mirror found inside the holes using a socket spanner; then simply pull the mirror out from the outside!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This guide outlines the main steps for removing and replacing the front headlight bulb on the Peugeot 508, following the instructions below. First, o…
How to remove the glove compartment from the Peugeot 508
How to remove the glove compartment from the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To independently remove the entire glove compartment located inside the cabin of your first-generation Peugeot 508, follow the procedure described in…
Where are the Fuses Located on a Peugeot 508?
Where are the Fuses Located on a Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) The fuses on a Peugeot 508 are housed within dedicated fuse boxes installed in the vehicle. There are two fuse boxes in this type of car. The first i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos