Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

Start by unscrewing and removing the screws located on the lower side of the bumper. After this, to proceed with the bumper removal, you will need to remove the rear lights.

Once the rear lights are removed, you will have access to the upper screws, bolts, and the two clips that secure the bumper supports. Remove these screws, bolts, and clips.

For more space, you may also remove the rear wheels, but this is not entirely necessary and is at your discretion. At this point, you will be able to remove the bumper, but before pulling it away, disconnect the number plate light.

Once the number plate light is removed, you will have successfully completed the bumper removal.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper from a Peugeot 308
How to Remove the Rear Bumper from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear bumper from a Peugeot 308, start with the rear wheel arches: push the trim inward and unscrew the Torx screws present on both side…
How to Remove the Rear Bumper of the Peugeot 308?
How to Remove the Rear Bumper of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear bumper of the Peugeot 308, open the tailgate and then loosen the screws that secure the two rear light clusters from the inside. O…
How to Remove the Front Bumper of a Peugeot 308
How to Remove the Front Bumper of a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today's guide will illustrate the steps on how to remove and replace the front bumper of a Peugeot 308. First, open the vehicle's bonnet and start un…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos