Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Install the Front Headlight Bulbs on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In today's video tutorial, you will learn how to dismantle and replace the front headlight bulbs on the first series Peugeot 208 in simple and quick steps. First, open the bonnet of your car and remove the plastic protective cover located behind the headlight; then disconnect the electrical connector of the bulb and unclip the metal spring to remove it, as shown in the video.

At this point, replace the bulb with a new one of the correct type (in this case, an H7 bulb), and reassemble everything, following the video until the end!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on a Peugeot 208
How to Replace the Headlight Bulbs on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How do you replace the bulbs fitted in the front headlight of a Peugeot 208? Open the bonnet by pulling the lever located at the bottom right of the …
How to Replace the Headlight Bulbs on a Peugeot 208?
How to Replace the Headlight Bulbs on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the dipped beam bulbs on a Peugeot 208, open the bonnet to access the engine bay. Next, remove the cover cap on the side of the grille: on…
How to replace the front headlight bulbs in the Peugeot 208?
How to replace the front headlight bulbs in the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) In this tutorial, see how to replace the front headlight bulbs in the Peugeot 208, a very simple and quick operation. First, ensure the key is not in…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos