Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on the Peugeot 307 1.6

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel injectors

Video tutorial

Discover in this video how to remove and replace the fuel injectors on the Peugeot 307 1.6 petrol, following these simple steps. First, open the bonnet of your car and start by removing the plastic engine cover, unscrewing the fixing screws; also remove the brake fluid reservoir.

Next, remove the plastic cover located under the wipers, also removing the wipers, and then remove the air filter box as shown in the video; now you can remove the rail and the fuel injectors, replacing them if necessary with new ones!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Remove the Injectors from a Peugeot 307
How to Remove the Injectors from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To remove the injectors from a Peugeot 307, start by disconnecting the battery for safety. Open the bonnet and locate the intake manifold and fuel li…
Where are the fuses located in the Peugeot 307?
Where are the fuses located in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Each of the two fuse boxes installed inside the Peugeot 307 serves to contain the fuses present in the vehicle: the first of these is located inside …
How to Replace the Reverse Light Bulb on a Peugeot 307
How to Replace the Reverse Light Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Below is the procedure necessary to independently replace the reverse light bulb on your Peugeot 307. First, ensure you have a new reverse bulb that …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos