Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the AdBlue Injector in a 2017 Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Fuel injectors

See other generations:
Video tutorial

Periodically, like all components of any vehicle, the AdBlue injector of the 2017 Peugeot 308 must be inspected and cleaned or replaced. Through this guide, you can learn how to do it. As explained, this injector is located at the bottom of the car, near the catalytic converter.

To replace it, first lift the car and then remove the engine protection panel. Once the injector is located, you can remove its protective sleeve and disconnect it from the bracket.

At this point, simply clean it with a suitable cleaner or replace it with a new one.


Posted on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the AdBlue Injector on a Peugeot 308
How to Replace the AdBlue Injector on a Peugeot 308
Peugeot 308 (2021-2026 / P5, MK 3) Learn how to replace the AdBlue injector on a Peugeot 308: this can resolve error codes P208E and P20F6. Both codes, detected by a scan with a diagno…
How to clean or replace the AdBlue injector on the Peugeot 308 1.6 HDi
How to clean or replace the AdBlue injector on the Peugeot 308 1.6 HDi
Peugeot 308 (2013-2021 / T9, MK 2) In this video, we see where the AdBlue injector of the Peugeot 308 is located, so that we can replace or clean it, if necessary. We need to lift the …
How to Clean an AdBlue Injector
How to Clean an AdBlue Injector
Peugeot 308 (2021-2026 / P5, MK 3) In this video, we demonstrate a method to clean the AdBlue injector, which in this case is located on a Peugeot 308, but the system is applicable to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos