Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean an AdBlue injector

Model: Peugeot 308 P5, MK 3 - Years 2021-2026
Part: AdBlue warning light

In this video we see a method for cleaning the AdBlue injector, which in this case is located on a Peugeot 308, but the system is valid for any type of vehicle that has this additive system installed. The injector is located on the bottom of the car and it is not difficult to disassemble: just remove the clamp and in this way we will have the injector on one side and the seat on the other. In this case, the youtuber cleans it with a metal brush, and certainly the result obtained is good. We recommend an even simpler method: immerse the injector in very hot water, and clean the seat with a cloth soaked in the same very hot water. It will remove all the dirt and even the AdBlue deposits in a flash, making it practically new. Dry well before screwing the clamp back on.

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to clean or replace the AdBlue injector on the Peugeot 308 1.6 HDi
How to clean or replace the AdBlue injector on the Peugeot 308 1.6 HDi
Peugeot 308 (2013-2021 / T9, MK 2) In this video, we see where the AdBlue injector of the Peugeot 308 is located, so that we can replace or clean it, if necessary. We need to lift the …
How to Replace the AdBlue Injector in a 2017 Peugeot 308?
How to Replace the AdBlue Injector in a 2017 Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) Periodically, like all components of any vehicle, the AdBlue injector of the 2017 Peugeot 308 must be inspected and cleaned or replaced. Through this…
How to Replace the AdBlue Injector on a Peugeot 308
How to Replace the AdBlue Injector on a Peugeot 308
Peugeot 308 (2021-2026 / P5, MK 3) Learn how to replace the AdBlue injector on a Peugeot 308: this can resolve error codes P208E and P20F6. Both codes, detected by a scan with a diagno…

    Frequently Asked Questions

    • 308 2013-2021 - Where do you refill the AdBlue on the Peugeot 308? Read answer
    • 308 2007-2014 - Where is the AdBlue fuse on a Peugeot 308? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos