Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean or replace the AdBlue injector on the Peugeot 308 1.6 HDi

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Fuel injectors

In this video, we see where the AdBlue injector of the Peugeot 308 is located, so that we can replace or clean it, if necessary. We need to lift the car, the injector is clearly visible near the exhaust system: we disconnect the electrical connector and unscrew the clamp that connects it to the pipe where it injects the liquid, so that we can remove it. The youtuber cleans it mechanically, but we recommend cleaning it with the simplest and most effective system in the world: hot water. Heat a decent amount of water in a kettle and immerse the injector for a few minutes. It will come out like new. Clean the delivery nozzle on the other side of the pipe in the same way with a sponge: you will achieve excellent results.

Posted on 21 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the AdBlue Injector in a 2017 Peugeot 308?
How to Replace the AdBlue Injector in a 2017 Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) Periodically, like all components of any vehicle, the AdBlue injector of the 2017 Peugeot 308 must be inspected and cleaned or replaced. Through this…
How to clean an AdBlue injector
How to clean an AdBlue injector
Peugeot 308 (2021-2026 / P5, MK 3) In this video we see a method for cleaning the AdBlue injector, which in this case is located on a Peugeot 308, but the system is valid for any type …
How to clean the AdBlue injectors on a Peugeot 308 1.6 HDI
How to clean the AdBlue injectors on a Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) In this video, learn how to clean the AdBlue injectors on a Peugeot 308 1.6 HDI: by removing them, you will see they are heavily caked with the addit…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos