Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Warning Light on the Peugeot Boxer 2

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, follow the steps to reset the service light for routine maintenance on the Peugeot Boxer second series, as well as the Fiat Ducato. First, get inside the vehicle; then press and hold the brake and accelerator pedals.

Next, turn the key to position one to switch on the ignition and wait for about thirty seconds for the reset procedure to take effect. At this point, you can switch off the ignition and then start the engine to complete the reset operation!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on Peugeot Boxer?
How to Reset the Service Light on Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the service light on the Peugeot Boxer, simultaneously press the accelerator and brake pedals. While holding the pedals down, insert the ign…
How to Reset the Service Light on a Peugeot Boxer?
How to Reset the Service Light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the Service light on a Peugeot Boxer, turn on the ignition by rotating the key: once the dashboard is lit, press and hold the accelerator an…
How to Reset the Service Light on a Peugeot Boxer
How to Reset the Service Light on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) In today's video, we will see how to reset the service light on a Peugeot Boxer (this video also applies to the Citroen Jumper and Fiat Ducato). Ente…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos