Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Peugeot Boxer?

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Service warning light

To reset the Service light on a Peugeot Boxer, turn on the ignition by rotating the key: once the dashboard is lit, press and hold the accelerator and brake pedals simultaneously for a few seconds. While holding them down, turn off the dashboard: once it is off, you can release both pedals. Finally, turn the dashboard back on to check that the reset of the light has occurred correctly.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Boxer (2006-2024 / MK 2) When the service light comes on in Peugeot Boxer vehicles, it means that it is necessary to perform a car service, such as replacing air and oil filt…
Peugeot Boxer (2006-2024 / MK 2) To reset the service light on the Peugeot Boxer, simultaneously press the accelerator and brake pedals. While holding the pedals down, insert the ign…
Peugeot Boxer (2006-2024 / MK 2) The operations to perform when discussing a service are essentially the oil and oil filter change of the engine, to which, depending on the vehicle's…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos