Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Shell on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

To replace the key shell on a Peugeot 206, loosen the screw located at the back of the key and remove the cover to access the chip inside. At this point, open the new key shell and insert the chip along with the battery. Once all these components are in place, you can close the new shell by securing the parts with the clips. After replacing the components, check the proper functioning of the remote and the key.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Peugeot 206
How to replace the battery of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If you want to replace the battery of your Peugeot 206 on your own, just follow the steps described in the following guide and apply them step by ste…
How do you program the key of the Peugeot 206?
How do you program the key of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To program the key of the Peugeot 206, you need to connect a diagnostic tool to the OBD port of the vehicle, after inserting the blank key into the k…
How do you program the key of the Peugeot 206?
How do you program the key of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To ensure that the programming of the Peugeot 206 key takes place, you will need to connect a diagnostic tool to the OBD port of the vehicle: the lat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos