Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Window Switches on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Power window switch

To remove the window switches, perform a very simple operation that requires only a bit of manual skill and some patience. Use a small flat screwdriver to lever in the tiny gap around the casing containing the switches. This will be enough to remove them from their housing. As mentioned earlier, take care not to damage the door or other parts. At this point, disconnect the switch connectors by pressing on them, not on the wires. To insert the new casing with the buttons, reconnect the connectors and snap it back into place.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the window lifter of the Peugeot 206?
How do you replace the window lifter of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the window regulator of the Peugeot 206, you need to loosen the screws that fix the door panel to its housing: these screws are l…
Replacing the Door Panel on a Peugeot 206
Replacing the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel on a Peugeot 206 if it is irreparably damaged and cannot be replaced. Here’s how to do it. Using a screwdriver, unscrew the sc…
How do you reset the window regulator of the Peugeot 206CC?
How do you reset the window regulator of the Peugeot 206CC?
Peugeot 206 (1998-2012 / MK 1) To reset the power windows of the Peugeot 206CC, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos