Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 1, T84
- Years 2009-2016 The guide shows how to replace the electric handbrake control of the Peugeot 3008 Mk1. As a first step it is necessary to remove the finishing body of the gearbox panel; for this operation it is recommended to use a lever to lift plastic. At this point it is possible to remove the operating cover of the brake control. Lower the retaining clips and disconnect the power cord using the plastic clip. Replace the new handbrake control to the old one. Check the correct insertion of the piece and reassemble the finishing panel of the gearbox block. Check the correct operation of the control before taking the road.
Posted on 12 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |