Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the external wing mirror on a Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the external wing mirror of a second-generation Peugeot Expert. First, open the door and remove the triangular plastic cover by prying it with a thin tool; then remove the plastic clips and unscrew the Torx screws found underneath.

At this point, disconnect the electrical connector for the mirror glass adjustment and extract the entire mirror from the outside, as shown in the video. Finally, replace it with the new one by reversing the procedure!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to replace the armrest of the Peugeot Expert
How to replace the armrest of the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) These short and simple instructions will show us the process of disassembly and replacement of the driver's seat armrest of the Peugeot Expert. First…
How to Replace the Timing Belt on the Peugeot Expert?
How to Replace the Timing Belt on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To replace the timing belt on the Peugeot Expert, open the bonnet to access the components in the engine bay. On the left side, locate the plastic pr…
How to Replace the Front Headlamp Bulb on Peugeot Expert
How to Replace the Front Headlamp Bulb on Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) This video tutorial shows how to replace the front headlamp bulb on a Peugeot Expert. The replacement can typically be done independently by purchasi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos