Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Rear Brake Pads

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake pads

Video tutorial

This video shows how to replace the rear brake pads. Once the car is raised and the wheel is removed with the necessary precautions, locate the two screws that hold the caliper and unscrew them.

After unscrewing, remove the caliper by sliding it outward, using a screwdriver if needed; remove the old pads from their housing and clean the area. When finished, retract the caliper piston using the appropriate tool; then install the new brake pads and reassemble everything, ensuring to pump the brake pedal before driving off.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Peugeot 307 (2001-2009 / MK 1) Are the brake pads due for replacement? Remove the wheel and replace the pads. Unscrew the retaining pin of the brake caliper and remove it from the …
Peugeot 307 (2001-2009 / MK 1) In this short video, learn how to replace the brake pads on your Peugeot 307 CC. First, remove the wheel, then unscrew the bolts holding the brake ca…
Peugeot 307 (2001-2009 / MK 1) Open the bonnet and insert the support rod. Use a protective cover on the wing to avoid scratches and damage. Unscrew the cap of the brake fluid rese…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos