Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

If the oil change warning light continues to illuminate on your Peugeot 208 despite having already changed the oil and replaced the filter, you must perform a manual reset. To do this, follow the instructions in this mini guide. First, switch off the car. Next, locate the button immediately to the left of the speedometer and hold it down. At the same time, insert the key and turn on the ignition. Wait for the countdown to finish, then release the button. The reset is complete.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…
How to Reset the Engine Warning Light on a Peugeot 208
How to Reset the Engine Warning Light on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Today's guide will provide instructions on how to reset the engine warning light on a Peugeot 208. First, get inside the vehicle and turn on the inst…
How to Reset the Engine Warning Light on the Peugeot 208
How to Reset the Engine Warning Light on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This guide explains the procedure to reset the engine warning light that appears on the dashboard display of the Peugeot 208. Before resetting the en…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos