Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Peugeot 107

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Headlight bulb

Before discovering how to replace the H4 bulb in the front headlamp of the Peugeot 107, ensure the engine is off and the car is parked on a flat surface for safety. Once done, lift the bonnet and locate the headlamp containing the bulb to be changed. Unscrew the screws present and remove the headlamp in question. At this point, disconnect the bulb connector, remove the rubber protective cap, and pull out the old bulb. Now insert the new bulb, correctly reposition the protective cap, and reconnect the connector. Finally, reattach the headlamp and close the bonnet.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of a Peugeot 107
How to replace the front headlight bulb of a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) The first step to replace the bulb of a front headlight of a Peugeot 107 car is to open the hood and secure it in position. At this point, locate the…
How do you replace the front headlight bulb of the Peugeot 107?
How do you replace the front headlight bulb of the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In order to replace the headlight bulb of the Peugeot 107, it is necessary to open the hood, in order to have access to the components located in the…
How to Replace the Bulbs in the Front Headlamp on a Peugeot 107
How to Replace the Bulbs in the Front Headlamp on a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Do you want to replace the bulbs in the front headlamp on a Peugeot 107? Let's see how to proceed in the video: Open the bonnet by pulling the lever …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos