Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Daytime Running Lights of the Peugeot 5008

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Headlight bulb

In this video, you will find the main instructions to remove and replace the daytime running lights or front position lights of the Peugeot 5008. First, open the bonnet and start by removing the plastic protective cover of the bulbs; then use a pair of needle-nose pliers to remove the electrical connector along with the position bulb, as shown in the video. At this point, remove the bulb and replace it with the new one of the correct type; simply position it inside the bulb holder and reassemble everything, replacing the bulb of the other headlight.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Peugeot 5008
How to reset the oil light on the Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) If the engine oil light of your Peugeot 5008 continues to stay on even after recently changing the oil and filter, then you must proceed with manuall…
How to Access the Cabin Fuse Box on a Peugeot 5008
How to Access the Cabin Fuse Box on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Before you can begin, open the driver's side door of your Peugeot 5008. The cabin fuse box is located on the lower left side of the steering column. …
How to replace the battery of the Peugeot 5008 key
Peugeot 5008 (2017-2024 / MK 2) The replacement of the battery of a Peugeot 5008 key follows some very simple steps. The first step to be performed is to remove the metal key, to do…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos