Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to reset the service light of the Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: -board computer
Operation: How to reset the service light of the Peugeot 3008

If you want to manually reset the service warning light shown on the display of your 2017 Peugeot 3008 then all you have to do is put into practice the instructions described in the following mini guide. First make sure you start the whole procedure with the car completely turned off. Then locate the small button located on the right side of the picture and keep it pressed. At the same time insert the key and turn on the ignition. At this point a short countdown will start. Wait for it to finish and immediately release the button. At this point, the reset of the light is complete.


Posted on 30 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - What does "Parking assistance system error" mean on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the screen of the Peugeot 3008 not turning on? Read Answer
    • 3008 2016-2023 - What to do when the Peugeot 3008 cruise control does not work? Read Answer
    • 3008 2009-2016 - Why is the tire pressure not monitored on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What to do with stuck Peugeot 3008 touch screen? Read Answer
    • 3008 2016-2023 - How to solve Peugeot 3008 display malfunctions? Read Answer
    • 3008 2016-2023 - What does the adblue light on the Peugeot 3008 mean? Read Answer
    • 3008 2009-2016 - What does the turning on of the engine light mean in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why does the AdBlue warning light flash in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What does the orange warning light with the exclamation mark mean in the Peugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos